This article is straight to the point, packed with pure gold! Today, I’m sharing the latest NetApp NS0-194 practice exam!
The NS0-194 practice exam is laser-focused on the skills of a support engineer, designed to validate your expertise in supporting, troubleshooting, maintaining, and monitoring NetApp data storage systems.
If you’re already familiar with the exam details, feel free to skip ahead and download the 60 latest NetApp NS0-194 practice exam questions at: https://www.leads4pass.com/ns0-194.html. Available in both PDF and VCE formats, they include the most up-to-date, complete set of exam questions and answers, guaranteeing you a 100% pass!
If you’re a beginner, you should get familiar with the exam content and key skills, format requirements, real-world applications, and career benefits. Most importantly, I’m sharing a free, up-to-date NetApp NS0-194 practice exam online!
NetApp NS0-194 Exam Content and Key Skills
Main Content:
- System administration and troubleshooting (including log analysis).
- Data protection solutions (e.g., SnapMirror, SnapVault).
- Hardware replacement and maintenance.
- Software and firmware upgrades.
- Performance monitoring and optimization.
Key Skills:
- Diagnosing and resolving complex issues.
- Providing on-site and remote technical support.
- Deep understanding of ONTAP architecture and data management.
NetApp NS0-194 Exam Format Requirements
- Duration: 90 minutes.
- Number of Questions: Approximately 60 questions (multiple-choice, single-choice).
- Passing Score: 70%
- Prerequisites: Recommended to have NetApp Certified Data Administrator (NCDA) level knowledge and at least 6 months of hands-on support experience.
- Language: English.
- Cost: Approximately $150
- Future Cost (May 1, 2025): $200 USD says NetApp
NetApp NS0-194 Real-World Applications
Typical Tasks: Diagnosing customer-reported performance issues (e.g., 100% disk utilization), performing firmware upgrades, or replacing faulty hardware.
Scenarios: Providing remote or on-site support, tackling complex technical challenges.
NetApp NS0-194 Career Development (2025)
The NS0-194 certification significantly boosts the career prospects of technical support engineers, particularly in NetApp product support and customer service. In 2025, as enterprises increasingly rely on hybrid cloud and data-centric solutions, NS0-194-certified professionals are in high demand for roles such as Storage Support Engineer, Systems Administrator, and Cloud Infrastructure Specialist. This certification validates expertise in troubleshooting and maintaining NetApp ONTAP systems, making holders stand out in the competitive IT support landscape. According to industry trends, certified engineers can expect salaries ranging from $85,000 to $120,000 annually in the U.S., with opportunities for advancement into senior support or consulting roles, especially in industries like finance, healthcare, and tech.
NetApp NS0-194 practice exam online
| Number of exam questions | Related certifications |
| 15 (Free) | (NCDA, NS0-163), (NCTA, NS0-003),(NCSIE, NS0-184),(NCIE-SAN, NS0-520) |
Question 1:
What are two conditions that would cause writes in memory to be written to disk? (Choose two.)
A. The NVRAM (NVLog) fills up.
B. A user presses “Save”.
C. Drive capacity becomes available.
D. A Snapshot copy is taken.
Correct Answer: AB
Question 2:
Which CIFS server configuration determines the domain controllers that a CIFS server uses?
A. site membership
B. enabled SMB versions
C. trusted domains
D. discovery mode
Correct Answer: A
Question 3:
When using NetApp Volume Encryption (NVE) which type of server is needed to keep encryption keys separate from encrypted data?
A. KMIP
B. RADIUS
C. TLS
D. TKIP
Correct Answer: A
Question 4:
You are using FCP and iSCSI protocols from your clients with ONTAP as the target. You want to ensure that storage failover (SFO) works correctly for your clients.
In this scenario, which two features on the initiator and the target will accomplish this task? (Choose two.)
A. LACP
B. MPIO
C. ALUA
D. SCSI
Correct Answer: BC
Reference: https://www.netapp.com/media/10680-tr4080.pdf
Question 5:
You have determined that an SFP+ has failed on one of your storage controllers.
In this scenario, what do you use to determine which SFP+ should be replaced by NetApp Support?
A. NetApp Active IQ
B. Interoperability Matrix Tool
C. NetApp Documentation Center
D. Hardware Universe
Correct Answer: D
Question 6:
You receive the error shown below on a FAS2750 HA pair.
Mon Jun 24 00:27:30 UTC [NetappA: scsi_cmdblk_strthr_admin: scsi.cmd.checkCondition:error]: Unknown device 0a.00.99: Check Condition: CDB 0x12: Sense Data SCSI:hardware error – (0x4 – 0x44 0x0 0x0) (0).
The system is cabled as shown in the exhibit.
What should you do to clear the error?
A. Replace the cable connected to controller A\’s 0a port.
B. Replace the controller of controller B.
C. Replace the controller of controller A.
D. Re-cable the system per the FAS2750 installation guide.
Correct Answer: C
Question 7:
A customer will need to perform an upgrade from 9.0 to 9.4.
Which feature of ONTAP enables nondisruptive hardware maintenance for this upgrade?
A. aggregate relocation
B. FlexVol
C. FlexGroup
D. RAID-TEC
Correct Answer: A
Question 8:
You have a 4-node MetroCluster system. A node needs to be taken down for maintenance, but all data needs to remain online.
In this scenario, what should you do to bring down a single node?
A. Perform an HA takeover of the node.
B. Perform a MetroCluster switchover.
C. Disable HA on each side of the MetroCluster.
D. Perform an aggregate relocation of the CFO aggregates on the node.
Correct Answer: A
Question 9:
You want to update your storage system and are concerned about the compatibility of the SAN components and the host environment.
In this scenario, which two actions should you take to verify compatibility? (Choose two.)
A. Use the Interoperability Matrix Tool.
B. Use Active IQ Interop Advisor.
C. Upload AutoSupports to Active IQ.
D. Use the Active IQ Config Advisor.
Correct Answer: AD
Question 10:
What are two reasons to use VLANs in a NetApp storage solution? (Choose two.)
A. to isolate UDP traffic from TCP traffic
B. to isolate management traffic from other IP traffic
C. to isolate iSCSI traffic from NAS traffic
D. to isolate FC traffic from other IP traffic
Correct Answer: AC
Question 11:
For security reasons, you must track the access of files of a specific folder.
In this scenario, what should you do to accomplish this task from the storage side?
A. Implement a Vscan solution.
B. Use a cron job to save the audit log.
C. Use role-based access control to track access.
D. Implement an FPolicy solution.
Correct Answer: D
Reference: https://library.netapp.com/ecmdocs/ECMP1196993/html/GUID-07D368C8-F4DD-4F14-9E6899C63881EBE7.html
Question 12:
A customer is showing disk utilization is at 100% in Active IQ even though there are low protocol operations on the controller. You review the data shown in the exhibit.
In this situation, what should you do?
A. Replace disks 6b.34 and 6a.19.
B. Add disks to the aggregate to bring down the average utilization.
C. Replace disk 6b.39.
D. Reseat shelf module B.
Correct Answer: C
Question 13:
A customer ordered a FAS2720 cluster with 8 TB SATA drives. The customer wants to use the Advanced Drive Partitioning (ADP) feature to avoid consuming the high capacity drives for the root aggregate. Before you use the cluster setup, you issue the aggr status command and notice that ADP is not being used.
In this scenario, what would you use to implement ADP?
A. loader prompt
B. special boot menu
C. nodeshell
D. SP prompt
Correct Answer: A
Question 14:
You are working on a fabric MetroCluster. After a site failure, the plex starts to resync automatically to the aggregate mirror of Aggr1. The plex now shows a status of resyncing. During this process, you experience a slow resync of the SyncMirror plex.
In this scenario, how do you solve the problem?
A. Add more disks to the aggregate to add more I/O capacity.
B. Destroy and re-create plex, then run a baseline sync.
C. Tune the resync speed by adding a QoS policy and limit the concurrent I/O to the aggregate.
D. Tune the resync speed using the storage raid-options command.
Correct Answer: C
Reference: https://library.netapp.com/ecmdocs/ECMP1368831/html/GUID-F3E1536B-0C54-4D4F-B9853D839032234D.html
Question 15:
While troubleshooting client access issues to a CIFS share, you notice that the issue only occurs when the data LIF that the clients are accessing is on a specific node in the cluster.
In this scenario, which configuration should you review to determine why this issue is happening?
A. cluster health
B. Kerberos
C. share path
D. export policies
Correct Answer: B
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMLP2426787
…
This free, up-to-date NetApp NS0-194 practice exam is generously provided by Leads4Pass. The current Leads4Pass NS0-194 practice exam includes 60 of the latest exam questions and answers, with real-time updates to ensure ongoing validity. Download it now at: https://www.leads4pass.com/ns0-194.html, and you’re guaranteed to pass the exam 100%!